Skip to content

3D Tour Instructions

Step Inside

Explore every corner and use the real-time measuring tool.

View Dollhouse

Explore 3D Space

View Floorplan

Floor Selector

Share This Space

View in VR

View Fullscreen

Exit Fullscreen

Use browser back button

Measurement Mode

Use Measurement Mode in (Phone or Tablet) 

  1. Tap the “Measurement Mode” icon at the bottom-left of the screen. 
  2. Navigate to the area you want to measure.
    1. You can do this by tapping on different aspects of the environment – once you’ve found the general area you want to measure, frame your shot by dragging to look around. 
  3. Tap the “+” icon in the center of the screen.
  4. Press and hold your finger on the exact location where you want to start your measurement.
    1. If you’re starting your measurement on the corner of a table, we recommend zooming (expand your fingers) to place the point exactly where you want it. 
  5. Place and hold your finger on the exact location where you want to end your first measurement.
    1. This will create a measurement line between the two points you selected. 
    2. Alternatively, you can hold your finger over the first measurement, then drag the line along the edge or corner you want to measure. 
  6. To continue adding lines to your current measurement, press and hold on the next point you’d like to measure.
  7. When you’re finished measuring, click the green “Check” icon to view your measurements in Showcase, or the “Trash” icon to start over.

Tips 

“Scope” it – Use the “scope” to refine your measurements. 

Click and drag to move around  –  Remember, your floor plan is a 3D object. Move around to the get the best vantage point for your measurements! 

You can set preferences for the measurements tool by clicking on the cog icon in the upper right corner of the screen.

Snapping determines whether the ‘scope’ will automatically snap onto edges and corners, which is an accurate way to use it.  Turn it off if you’d like to choose a point yourself.

Continuous Lines, if on, will make each measurement become continuous with its predecessor.

Units is the choice of U.S. (Imperial) or Metric units.

Use Measurement Mode in (Phone or Tablet) 

  1. Tap the “Measurement Mode” icon at the bottom-left of the screen. 
  2. Navigate to the area you want to measure.
    1. You can do this by tapping on different aspects of the environment – once you’ve found the general area you want to measure, frame your shot by dragging to look around. 
  3. Tap the “+” icon in the center of the screen.
  4. Press and hold your finger on the exact location where you want to start your measurement.
    1. If you’re starting your measurement on the corner of a table, we recommend zooming (expand your fingers) to place the point exactly where you want it. 
  5. Place and hold your finger on the exact location where you want to end your first measurement.
    1. This will create a measurement line between the two points you selected. 
    2. Alternatively, you can hold your finger over the first measurement, then drag the line along the edge or corner you want to measure. 
  6. To continue adding lines to your current measurement, press and hold on the next point you’d like to measure.
  7. When you’re finished measuring, click the green “Check” icon to view your measurements in Showcase, or the “Trash” icon to start over.

Tips 

“Scope” it – Use the “scope” to refine your measurements. 

Click and drag to move around  –  Remember, your floor plan is a 3D object. Move around to the get the best vantage point for your measurements! 

You can set preferences for the measurements tool by clicking on the cog icon in the upper right corner of the screen.

Snapping determines whether the ‘scope’ will automatically snap onto edges and corners, which is an accurate way to use it.  Turn it off if you’d like to choose a point yourself.

Continuous Lines, if on, will make each measurement become continuous with its predecessor.

Units is the choice of U.S. (Imperial) or Metric units.